TM 5-3810-305-23
FIELD MAINTENANCE
STARTER MOTOR MAINTENANCE
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
Face Shield, Industrial (WP 0171, Table 1, Item
Equipment Condition
25)
Boom in horizontal position and fully retracted (TM
Goggles, Industrial (WP 0171, Table 1, Item 27)
5-3810-305-10)
Wrench, Torque, Click, Ratcheting 3/8 Inch Drive,
Battery cables disconnected (WP 0076)
75 ft-lb (WP 0171, Table 1, Item 36)
Materials/Parts
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
Tag, Marker (WP 0170, Table 1, Item 68) Qty: 1
REMOVAL
NOTE
Tag and identify all wire assemblies before disconnecting to aid in installation. Remove tags
following maintenance.
1.
Disconnect cables and wires from starting motor solenoid (Figure 1, Item 2).
2.
Remove three capscrews (Figure 1, Item 4), clip (Figure 1, Item 1) and starting motor (Figure 1, Item 3)
from engine.
1
2
3
4
M0115105
Figure 1.
Starter Motor Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00069)