TM 5-3810-305-23
0065
REMOVAL
NOTE
Tag all wire assemblies before disconnecting to aid installation. Remove tags
following maintenance.
1.
Disconnect pressure switch wire (Figure 1, Item 5) and transducer wire (Figure 1, Item 17) from transducer
(Figure 1, Item 4).
NOTE
Tag all hose and tube assemblies before disconnecting to aid in installation. Cap and plug
all ports. Remove caps, plugs and tags following maintenance.
2.
Disconnect two hose fittings (Figure 1, Items 10 and 18) from elbow adapters (Figure 1, Items 9 and 19) on
transducer (Figure 1, Item 4).
3.
Disconnect hose fitting (Figure 1, Item 16) from elbow adapter (Figure 1, Item 13) and remove hose
(Figure 1, Item 11) from vehicle.
4.
Disconnect hose fitting (Figure 1, Item 14) from straight adapter (Figure 1, Item 15) and remove hose
(Figure 1, Item 12) from vehicle.
5.
Remove two nuts (Figure 1, Item 20), capscrews (Figure 1, Item 3), clamps (Figure 1, Item 7), and transducer
(Figure 1, Item 4) from plate (Figure 1, Item 2).
6.
Remove two elbow adapters (Figure 1, Items 9 and 19) from transducer (Figure 1, Item 4).
7.
Remove pressure switch (Figure 1, Item 6) from tee adapter (Figure 1, Item 8).
8.
Remove tee adapter (Figure 1, Item 8) from transducer (Figure 1, Item 4).
9.
Remove two capscrews (Figure 1, Item 1) and plate (Figure 1, Item 2) from vehicle.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
0065-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00071)
