TM 5-3810-305-23
0101
INSTALLATION - Continued
3.
Install input yoke (Figure 2, Item 2), dust shield (Figure 2, Item 8) and new pinion nut (Figure 2, Item 1).
Tighten pinion nut to 405 to 433 ft-lb (549 to 587 Nm). Stake pinion nut in two locations 180 degrees apart.
1
2
3
8
4
7
5
6
M0315105
Figure 2.
Rear Differential Assembly Installation.
4.
If differential was disassembled, file off washer face of bolts (Figure 3, Item 1) flush with machined surface of
bearing cap (Figure 3, Item 2).
1
2
M0316105
Figure 3.
Rear Differential Assembly Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00111)