TM 5-3810-305-23
0104
INSTALLATION
NOTE
If yoke was disassembled, use measurement taken in disassembly to assemble yoke to rod.
1.
Install two new o-rings (Figure 17, Item 25) and elbows (Figure 17, Item 26) to master cylinder.
2.
Install yoke (Figure 17, Item 18), push rod (Figure 17, Item 5), and tighten jam nuts (Figure 17, Item 28).
3.
Position brake booster valve, master cylinder, and brake pedal stop bracket under dash on mounting
bracket (Figure 17, Item 27).
4.
Install four new lockwashers (Figure 17, Item 7) and capscrews (Figure 17, Item 6).
5.
Attach yoke (Figure 17, Item 18) to brake pedal (Figure 17, Item 8) using pin (Figure 18, Item 17).
6.
Install new cotter pin (Figure 17, Item 21) in pin (Figure 17, Item 17).
13
3
9
2
14
8
4
1
12
15
11
5
10
16
6
7
17
34
32
19
18
31
28
20
33
27
30
23 22
21
29
24
26
25
M0490105
Figure 17. Master Cylinder Installation.
7.
Install four new lockwashers (Figure 18, Item 1) and capscrews (Figure 18, Item 2) in steering wheel pump.
03/15/2011Rel(1.8)root(maintwp)wpno(M00115)
