TM 5-3810-305-23
0104
DISASSEMBLY - Continued
15.
Remove plug (Figure 10, Item 6) and o-ring (Figure 10, Item 5) from plug. Discard o-ring.
NOTE
Record number of shims when removed.
16.
Remove spring (Figure 10, Item 4), shims (Figure 10, Item 3), and piston (Figure 10, Item 2) from brake booster
valve housing (Figure 10, Item 1).
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
ASSEMBLY
CAUTION
Use only clean hydraulic oil to lubricate. Failure to follow this caution may result in damage
to equipment.
1.
Lubricate all parts with hydraulic oil before assembling.
2.
Install piston (Figure 10, Item 2) and shims (Figure 10, Item 3) as recorded, and spring (Figure 10, Item 4) in
brake booster valve housing (Figure 10, Item 1). Piston must be free to move in housing.
3.
Install new o-ring (Figure 10, Item 5) and plug (Figure 10, Item 6).
6
5
4
3
2
1
M0497105
Figure 10. Brake Booster Maintenance.
03/15/2011Rel(1.8)root(maintwp)wpno(M00115)