TM 5-3810-305-23
0110
DISASSEMBLY - Continued
WARNING
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle
pressure when drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when
cleaning components. DO NOT directed compressed air against human skin. Failure to follow
this warning may result in injury. Make sure air stream is directed away from user and
other personnel in the area. To prevent injury, personnel must wear protective goggles or
face shield.
4.
If control unit (Figure 2, Item 3) has been removed from vehicle, plug three of four ports in control unit
and attach air hose to remaining port. With air pressure, force seal package (Figure 2, Item 5) out.
Discard seal package.
1
1
2
2
5
5
3
3
4
M0407105
Figure 2. Steering Control Disassembly.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00123)