TM 5-3810-305-23
0119
REMOVAL
1.
Remove two nuts (Figure 1, Item 1), capscrews (Figure 1, Item 8), and clamps (Figure 1, Item 7) releasing
defroster fan harness (Figure 1, Item 6) from cab (Figure 1, Item 2).
2.
Remove 18 locknuts (Figure 1, Item 3) and washers (Figure 1, Item 4) from cab (Figure 1, Item 2).
Discard locknuts.
WARNING
Weight of cab is approximately 250 lb (113 kg). Use adequate lifting equipment to lift and
support cab. DO NOT lift over personnel or let personnel walk underneath suspended load.
Failure to follow this warning may cause injury or death to personnel.
3.
Attach hoist with sling through door and window openings in cab (Figure 1, Item 2).
4.
Using hoist and sling, lift cab (Figure 1, Item 2) off of frame.
5.
Remove seals (Figure 1, Item 5). Discard seals.
1
2
8
7
3
7
4
8
7
6
5
M0587105
Figure 1. Cab Assembly Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00132)
