TM 5-3810-305-23
0119
REMOVAL - Continued
NOTE
Floormats are held in place with adhesive and should not be removed unless inspection
indicates replacement is necessary.
7.
Inspect floormats (WP 0162).
8.
If necessary, remove two wingnuts (Figure 3, Item 4), washers (Figure 3, Item 3), and floormat
(Figure 3, Item 5) from cab (Figure 3, Item 1). Remove all adhesive from cab floor.
9.
Remove floormats (Figure 3, Items 2 and 6), if replacement is necessary from cab floor.
1
2
3
4
6
5
M0589105
Figure 3.
Floormats Removal.
NOTE
Insulation pads are held in place with adhesive and should not be removed unless inspection
indicates replacement is necessary.
10.
Inspect insulation pads (WP 0162).
11.
If left front or right side insulation pad replacement is necessary, remove cab main harness (WP 0079).
12.
If lower right insulation pad replacement is necessary, remove panel (WP 0066).
13.
If necessary, remove eight insulation pads. Remove all adhesive from cab wall.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00132)
