TM 5-3810-305-23
0121
REMOVAL
NOTE
The following is a maintenance procedure for one fender. The maintenance procedure for
the remaining fenders is identical.
1.
Remove six locknuts (Figure 1, Items 2 and 5) and washers (Figure 1, Items 3 and 4) from studs on frame.
Discard locknuts.
WARNING
Weight of fender is approximately 99 lb (45 kg). Use adequate lifting equipment to support
fender. DO NOT lift over personnel or let personnel walk underneath suspended load. Failure
to follow this warning may cause injury or death to personnel.
2.
Remove fender (Figure 1, Item 1) from frame.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
0121-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00135)