TM 5-3810-305-23
0122
REMOVAL
WARNING
Weight of brake drum is approximately 81 lb (37 kg). Use adequate lifting equipment to lift
and support brake drum. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may result in serious injury or death to
personnel.
1.
Remove five capscrews (Figure 1, Item 6), washers (Figure 1, Item 5), deck plate (Figure 1, Item 4),
and five clips (Figure 1, Item 7) from vehicle.
2.
Remove three locknuts (Figure 1, Item 8), four washers (Figure 1, Item 3), and capscrew (Figure 1, Item 2)
from pinion cover (Figure 1, Item 1). Discard locknuts.
3.
Remove pinion cover (Figure 1, Item 1) from vehicle.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSTALLATION
1.
Position pinion cover (Figure 1, Item 1) on vehicle.
2.
Install four washer (Figure 1, Item 3), capscrew (Figure 1, Item 2), and three new locknuts (Figure 1, Item 8)
on pinion cover (Figure 1, Item 1).
3.
Install five clips (Figure 1, Item 7), deck plate (Figure 1, Item 4), five washers (Figure 1, Item 5), and capscrews
(Figure 1, Item 6) on vehicle.
0122-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00136)