TM 5-3810-305-23
0140
REMOVAL - Continued
NOTE
Tag all hose and tube assemblies before disconnecting to aid in installation. Cap and plug
all ports. Remove caps, plugs, and tags following maintenance.
5.
Disconnect hoses (Figure 1, Items 11 and 12) from winch.
6.
Disconnect and remove hoses (Figure 1, Items 11 and 12) from two tubes (Figure 1, Item 10).
7.
Remove six capscrews (Figure 1, Item 18), two plates (Figure 1, Item 17), and eight clamps
(Figure 1, Item 16).
8.
Disconnect two tubes (Figure 1, Item 10) from rotary manifold.
9.
Disconnect two hoses (Figure 1, Item 9) from rotary manifold.
10.
Remove two locknuts (Figure 1, Item 8), two washers (Figure 1, Items 6 and 7), and two clamps
(Figure 1, Item 4) from hose (Figure 1, Item 9). Discard locknuts.
11.
Remove two hoses (Figure 1, Item 9) with flex trim (Figure 1, Item 14) from tubes (Figure 1, Item 1).
12.
Remove two tubes (Figure 1, Item 1) from elbows.
13.
Disconnect two hoses (Figure 1, Item 13) from rotary manifold.
14.
Remove five locknuts (Figure 1, Item 8), five washers (Figure 1, Items 3 and 15), and five clamps
(Figure 1, Item 2). Discard locknuts.
15.
Remove two hoses (Figure 1, Item 13) with flex trim (Figure 1, Item 14) and adapters (Figure 1, Item 5)
from vehicle.
0140-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00157)
