TM 5-3810-305-23
0139
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
ASSEMBLY
1.
Install bushings (Figure 4, Item 4) in handles (Figure 4, Item 1).
2.
Install two bushings (Figure 4, Item 9) in bracket assembly (Figure 4, Item 10).
3.
While pushing pin (Figure 4, Item 6) through bushing (Figure 4, Item 9), install washer (Figure 4, Item 8), handle
(Figure 4, Item 1), washer, tube (Figure 4, Item 5), washer, handle, and washer.
NOTE
Add washers as required to minimize end play in handles without causing binding.
4.
Secure pin (Figure 4, Item 6) in place with washers (Figure 4, Item 8), as required, and two cotter pins
(Figure 3, Item 7).
1
7
2
3
4
5
12
11
6
12
1
11
10
9
2
3
7
8
M2313105
Figure 4. Swing/Telescope Valve Controls Assembly.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00155)