TM 5-3810-305-23
FIELD MAINTENANCE
RETURN FILTER MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
O-Ring (WP 0172, Table 1, Item 120) Qty: 3
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
O-Ring (WP 0172, Table 1, Item 162) Qty: 2
Gloves, Rubber (WP 0171, Table 1, Item 26)
Tag, Marker (WP 0170, Table 1, Item 68) Qty:
1
Goggles, Industrial (WP 0171, Table 1, Item 27)
Washer, Lock (WP 0172, Table 1, Item 50)
Pan, Drain (WP 0171, Table 1, Item 39)
Qty: 4
Wrench, Oil Filter, Strap (WP 0171, Table 1, Item
32)
References
Materials/Parts
Cap Set, Protective, Dust and Moisture Seal
Equipment Condition
(WP 0170, Table 1, Item 7) Qty: 1
Vehicle parked on level ground (TM
Filter, Oil (WP 0172, Table 1, Item 103) Qty: 1
5-3810-305-10)
Lubricating Oil, Hydraulic MIL-L-2104 OE, 10
Boom in horizontal position and fully retracted (TM
Grade (WP 0170, Table 1, Item 42) Qty: 1
5-3810-305-10)
O-Ring (WP 0172, Table 1, Item 43) Qty: 1
Deck plates removed (WP 0122)
O-Ring (WP 0172, Table 1, Item 44) Qty: 2
REMOVAL
WARNING
DO NOT disconnect or remove any hydraulic system lines or fitting unless engine is shut
down and hydraulic system pressure has been relieved. Tighten all connections before
applying pressure. Escaping hydraulic fluid under pressure can penetrate the skin.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
Wear protective eye covering.
Avoid sudden movement of vehicle.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
Failure to follow these warnings may result in injury or death to personnel.
0148-1
03/15/2011Rel(1.8)root(maintwp)wpno(M00164)