TM 5-3810-305-23
0156
ASSEMBLY - Continued
WARNING
Weight of boom tip section is approximately 1,500 lb (680 kg). Use adequate lifting equipment
to lift and support boom tip section. Do not lift over personnel or let personnel walk underneath
suspended load. Failure to follow this procedure could cause DEATH or serious injury.
14.
Slide boom tip section with boom extend cylinder into boom base section.
15.
Install pin (Figure 26, Item 2), rod end (Figure 26, Item 3) and capscrew (Figure 26, Item 1).
1
2
3
M2413105
Figure 26. Boom Assembly Assembly.
16.
Install boom angle indicator (Figure 27, Item 2) and four lock nuts (Figure 27, Item 1).
1
2
M2414105
Figure 27. Boom Assembly Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00172)
