TM 5-3810-306-20
Section II. ENGINE LUBRICATION SYSTEM MAINTENANCE
ENGINE OIL FILTER REPLACEMENT
TOOLS: General mechanic’s tool kit: Automotive (5180-00-177-7033)
SUPPLIES:
Filter, Engine Oil (Item 56, Appendix C)
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Engine cool to touch.
REMOVAL:
1.
REMOVE AND DISCARD OIL FILTER (1)
FROM OIL COOLER HEAD.
INSTALLATION:
1.
INSTALL NEW OIL FILTER (1) INTO OIL
COOLER HEAD.
a.
Ensure mounting surface on oil cooler is
clean.
b.
Apply light coat of clean engine oil to filter
gasket.
c.
Install new oil filter hand tight making sure
gasket is seated against oil cooler.
2.
CONNECT GROUND CABLE AT SHUNT.
(REFER TO PAGE 8-109.)
3.
START ENGINE AND CHECK FOR LEAKS.
(REFER TO TM 5-3810-306-10.)
END OF TASK
4-5
