TURBOCHARGER OIL RETURN LINE REPLACEMENT

Section II. ENGINE LUBRICATION SYSTEM MAINTENANCE

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
110

TM 5-3810-306-20 TURBOCHARGER OIL RETURN LINE REPLACEMENT TOOLS: General mechanic’s tool kit: Automotive (5180-00-177-7033) SUPPLIES: Gasket (Item 8, Appendix C) EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: 1. REMOVE TURBOCHARGER OIL RETURN LINE. a. Remove capscrews (1) from oil tube connection (2) at turbocharger. b. Remove two clamps (3) and remove tube (2), gasket (4) and hose (5). Discard gasket (4). c. Remove tube (6) from engine block. INSTALLATION: 1. INSTALL TURBOCHARGER OIL RETURN LINE. a. Install tube (2) and new gasket (4) to turbocharger with capscrews (1). Torque capscrews (1) to 18 ft-lbs (24Nm). b. Install tube (6) in engine block. c. Connect tubes (2) and (6) with hose (5) using clamps (3). 2. CONNECT GROUND CABLE AT SHUNT. (REFER TO PAGE 8-109.) 4-6

Privacy Statement
Press Release
Contact