Section II. WATER MANIFOLD, HEADERS, THERMOSTAT AND GASKET MAINTENANCE

RADIATOR, MOORING BRACKET AND SHROUD REPLACEMENT - cont - TM-5-3810-306-20_174

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
147

TM 5-3810-306-20 Section II. WATER MANIFOLD, HEADERS, THERMOSTAT AND GASKET MAINTENANCE COOLANT FILTER REPLACEMENT TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) Drain pan SUPPLIES: Lubricating oil (Item 46, Appendix C) Clean rags (Item 1, Appendix C) Coolant filter (Item 23, Appendix C) Anti-freeze (Item 10, Appendix C) EQUIPMENT CONDITIONS: Engine is cool to touch Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: WARNING Pressurized cooling system. Remove cap slowly and only when engine is cool, or burns could result. NOTE Get set to catch coolant in pan. 1. UNSCREW COOLANT FILTER (3) FROM THERMOSTAT HOUSING (4). a. Remove radiator cap (1). Close shut off valve (2). b. Unscrew coolant filter (3) and discard. c. Clean gasket surface on thermostat housing (4) with rag. 7-14

Privacy Statement
Press Release
Contact