RADIATOR, MOORING BRACKET AND SHROUD REPLACEMENT - cont

RADIATOR, MOORING BRACKET AND SHROUD REPLACEMENT - cont - TM-5-3810-306-20_173

Section II. WATER MANIFOLD, HEADERS, THERMOSTAT AND GASKET MAINTENANCE

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
146

TM 5-3810-306-20 NOTE Ensure fan spacer is centered in hole in fan guard or fan may hit guard. b. Install four capscrews (9), new lockwashers (10), and flatwashers (11). 6. CONNECT TWO RADIATOR HOSES (3) AND COOLANT RECOVERY TANK HOSE (12). CAUTION Do not apply sealant to inside of radiator hose. This results in clogged coolant passages causing premature engine and radiator failure. a. Apply a moderate amount of permatex No. 2 to mate ends of radiator hose adapters. b. Put hose clamps (5) on two hoses (3). Push hose (3) on hose adapters. Wipe excess sealant with rag. c. Tighten two hose clamps (5). d. Connect coolant recovery tank hose (12) to radiator (6). Tighten hose clamp (15). 6. SERVICE RADIATOR. (REFER TO TM 53810- 306-10.) 7. INSPECT FOR LEAKS. 8. INSTALL ENGINE HOOD ASSEMBLY. (REFER TO PAGE 15-14.) 9. CONNECT GROUND CABLE AT SHUNT. (REFER TO PAGE 8-109.) END OF TASK 7-13

Privacy Statement
Press Release
Contact