TM 5-3810-306-20
Section I. ALTERNATOR MAINTENANCE
ALTERNATOR INSTALLATION
TOOLS: General mechanics tool kit: automotive (5180-00-177-7033)
SUPPLIES
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
RELIEVE BELT TENSIONER. (REFER TO PAGE
7-23.)
2.
REMOVE FAN DRIVE BELT ON ALTERNATOR
PULLEY. (REFER TO PAGE 7-23.)
3.
REMOVE ALTERNATOR ASSEMBLY (1).
a.
Tag and disconnect electrical leads from
alternator terminals.
b.
Remove capscrew (3) from alternator brace (4).
c.
Support weight of alternator (1).
d.
Remove two hex bolts (5), washers (6) and hex
nuts (7) from alternator bracket (8).
e.
Remove alternator (1).
f.
Remove four capscrews (2) and alternator
bracket (8) if necessary.
g.
Remove capscrew (9), and brace (4) if
necessary.
INSTALLATION:
1.
INSTALL ALTERNATOR ASSEMBLY (1).
a.
If removed, install alternator bracket (8) and
secure with four capscrews (2).
8-3