TM 5-3810-306-20
b.
If removed install brace (4) and install capscrew
(9) handtight.
c.
Align alternator (1) top mounting holes with
alternator bracket (8) and secure with two
capscrews (5), washers (6) and hex nuts (7).
d.
Secure alternator (1) to alternator brace (4) with
capscrew (3).
e.
Torque hex bolts (5), to 32 ft-lbs (43 Nm) and
capscrew (3) to 18 ft-lbs (24 Nm).
f.
Tighten capscrew (9).
g.
Connect tagged electrical leads.
h.
Install drive belt on alternator pulley. (Refer to
page 7-23.)
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
START
ENGINE.
CHECK
FOR
PROPER
OPERATION. (REFER TO TM 5-3810-30610.)
END OF TASK
8-4