TM 5-3810-306-20
DUAL AIR PRESSURE GAUGE REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Left front control panel removed. (Refer to page 8-11.)
Air system purged. (Refer to page 11-2.)
REMOVAL:
1.
DISCONNECT TWO AIR LINES (1), AND
LIGHT SOCKET (5).
a.
Pull socket (5) from gauge (3).
b.
Remove filter cap (4) and discard if damaged.
c.
Tag and disconnect two air lines (1). Remove
fittings (2).
2.
INSPECT BULB (6) FOR DAMAGE. IF BULB (6) IS
DAMAGED, REPLACE BULB (6).
3.
REMOVE GAUGE (3).
a.
Remove two nuts (7) and tooth washers (8). Pull
off mounting clamp (9).
b.
Push gauge (3) through panel.
4.
INSPECT ALL OTHER PARTS FOR DAMAGE.
REPLACE AS REQUIRED.
INSTALLATION:
1.
INSTALL GAUGE (3)
a.
Put gauge (3) through panel.
b.
Install mounting clamp (9), two nuts (7) and tooth
washers (8). Tighten nuts (7).
8-8
