TM 5-3810-306-20
Section III. INSTRUMENT PANEL MAINTENANCE
BLACKOUT LIGHT (MILITARY) SWITCH REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Left front control panel removed. (Refer to page 8-11.)
REMOVAL:
1.
DISCONNECT ELECTRICAL CONNECTOR (4).
a.
Tag electrical connector. Loosen locknut (2) and
connector nut (3). Slowly pull off electrical
connector (4).
b.
Remove four screws (5) from b. Remove four
screws (5) from control panel securing switch.
Pull switch (1) through panel.
2.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED.
INSTALLATION:
1.
INSTALL
SWITCH
(1)
AND
CONNECT
ELECTRICAL CONNECTOR (4).
a.
Put switch (1) through panel.
b.
Install four screws (5) and secure switch (1) in
control panel.
c.
Push electrical connector (4) on back of switch
(1).
d.
Tighten connector nut (3) and secure with
locknut (2).
2.
INSTALL
LEFT
FRONT
CONTROL
PANEL.
(REFER TO PAGE 8-11.)
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
4.
TURN SWITCH LEVER(S) TO TEST LIGHT
OPERATION. (REFER TO TM 5-3810-306-10.)
END OF TASK
8-7
