TM 5-3810-306-20
INSTALLATION:
1.
INSTALL STARTER MOTOR ASSEMBLY (1).
a.
Remove rags from flywheel housing.
b.
Position starter motor (1) and grounding cable
(4) on flywheel housing. Secure with three
capscrews (2) and new washers (3). Torque
capscrews 72 to 78 ft-lbs (96 to 104 Nm).
c.
Remove tags and connect electrical leads to
starter motor (1). Use new lockwashers where
required.
2.
INSTALL ENGINE OIL FILTER. (REFER TO PAGE
4-5.)
3.
INSTALL TURBOCHARGER OIL RETURN LINE.
(REFER TO PAGE 4-6.)
4.
CONNECT GROUND CABLE AT SHUNT.
(REFER TO PAGE 8-109.)
5.
START
ENGINE.
CHECK
FOR
PROPER
OPERATION OF STARTER MOTOR. (REFER TO
TM 5-3810-306-10.)
END OF TASK
8-6
