TM 5-3810-306-20
TRANSMISSION OIL TEMPERATURE SENDER REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Rear decking removed. (Refer to page 15-16.)
Engine cool to touch.
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE TEMPERATURE SENDER (1).
a.
Tag and disconnect electrical connector(s) to
temperature sender (1).
b.
Turn temperature sender (1) counter-clockwise
and remove from torque converter. Plug hole in
torque converter.
INSTALLATION:
1.
INSTALL TEMPERATURE SENDER (1).
a.
Remove plug and screw temperature sender (1)
into torque converter.
b.
Remove tag and connect electrical connector(s)
to temperature switch (1).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
INSTALL REAR DECKING. (REFER TO PAGE 15-
16.)
4.
START
ENGINE.
CHECK
FOR
PROPER
OPERATION
OF
AFFECTED
COMPONENT.
(REFER TO TM 5-3810-306-10.)
END OF TASK
8-49
