DCA FUEL PRESSURE TRANSDUCER REPLACEMENT

TRANSMISSION OIL TEMPERATURE SWITCH REPLACEMENT

HIGH COOLANT TEMPERATURE SWITCH REPLACEMENT

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
205

TM 5-3810-306-20 DCA FUEL PRESSURE TRANSDUCER REPLACEMENT TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) SUPPLIES: None EQUIPMENT CONDITIONS: Right engine access door open. Engine cool to touch. Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: 1. REMOVE PRESSURE TRANSDUCER (1). a. Tag and disconnect electrical connector(s) to pressure transducer (1). b. Turn pressure transducer (1) counter-clockwise and remove from engine. Plug hole in engine. INSTALLATION: 1. INSTALL PRESSURE TRANSDUCER (1). a. Remove plug and screw pressure transducer (1) into engine. b. Remove tag and connect electrical connector(s) to pressure transducer (1). 2. CONNECT GROUND CABLE AT SHUNT. (REFER TO PAGE 8-109.) 3. START ENGINE. CHECK FOR PROPER OPERATION OF AFFECTED COMPONENT. (REFER TO TM 5-3810-306-10.) END OF TASK 8-51

Privacy Statement
Press Release
Contact