TM 5-3810-306-20
DC POWER RELAY REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Lockwashers (Item 2, Appendix C) (2 Required)
EQUIPMENT CONDITIONS: Left engine access door open.
Engine cool to touch.
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE DC POWER RELAY (1).
a.
Tag and disconnect electrical connector(s) to DC
power relay (1).
b.
Remove two nuts (2), lockwashers (3),
flatwashers (4) and DC power relay (1). Discard
lockwashers (3).
INSTALLATION:
1.
INSTALL DC POWER RELAY (1).
a.
Install DC power relay (1) and secure with two
flatwashers (4) new lockwashers (3) and nuts
(2).
b.
Remove tag and connect electrical connector(s)
to DC power relay (1).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
START
ENGINE.
CHECK
FOR
PROPER
OPERATION
OF
AFFECTED
COMPONENT.
(REFER TO TM 5-3810-306-10.)
END OF TASK
8-56
