TM 5-3810-306-20
Section I. TRANSMISSION SHIFT MAINTENANCE
TRANSMISSION SHIFTER REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Operator’s seat removed. (Refer to page 15-27.)
Rear access panel removed. (Refer to page 8-21.)
REMOVAL:
1.
REMOVE TRANSMISSION SHIFTER.
a.
Remove clip pin (9) and clevis pin (8) from
transmission shift valve and shift lever linkage
(7).
b.
Remove clip pin (5) and clevis pin (6) from shift
lever linkage (7).
c.
Support shift lever (2) and remove hex nut (3)
from mounting bracket.
d.
Remove knob (1) and withdraw shift linkage (2)
from side console.
INSTALLATION:
l.
INSTALL TRANSMISSION SHIFTER.
a.
Install shift lever linkage (7) to transmission shift
valve with clevis pin (8) and clip pin (9).
b.
Insert shift lever (2) through side console shift
pattern hole and secure to mounting bracket with
nut (3).
c.
Connect shift lever (2) to shift lever linkage (7)
with clevis pin (6) and clip pin (5).
9-2
