TM 5-3810-306-20
INSTALLATION:
1.
INSTALL TRANSMISSION CONTROL VALVE.
a. Position valve (1) on mounting bracket and
secure with three capscrews (6) and new
lockwashers (7).
2.
REMOVE TAGS AND CONNECT ELECTRICAL
CONNECTORS TO NEUTRAL SAFETY SWITCH.
SECURE WITH SCREWS.
3.
INSTALL TWO SHIFTER LINKAGES.
a. Position linkages on valve spools, insert clevis
pin (4) and secure hitch pin clip (3).
NOTE
Prior to installing hydraulic lines,
coat preformed packings with clean
hydraulic oil and threads with Loctite
545.
4.
INSTALL TAGGED HYDRAULIC LINES TO VALVE
(1).
5.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
6.
TEST FOR PROPER OPERATION AND INSPECT
FOR LEAKS. (REFER TO TM 53810-306-10.)
7.
INSTALL REAR SIDE ACCESS PANEL. (REFER
TO PAGE 8-21.)
8.
INSTALL OPERATORS SEAT AND PEDESTAL.
(REFER TO PAGE 15-27.)
END OF TASK
9-9
