TM 5-3810-306-20
Section I. PINTLE HOOK MAINTENANCE
PINTLE HOOK INSTALLATION
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Cotter pin (Item 49, Appendix C)
EQUIPMENT CONDITIONS: None
REMOVAL:
1.
REMOVE PINTLE HOOK (1) FROM OUTRIGGER
WELDMENT.
a.
Remove and discard cotter pin (2).
b.
Remove slotted hex nut (3).
c.
Remove pintle hook assembly (1).
INSTALLATION:
1.
INSTALL PINTLE HOOK (2).
a.
Install pintle hook (2) through outrigger weldment
and secure with slotted hex nut (3).
b.
Install new cotter pin (2) to retain slotted hex nut
(3).
2.
LUBRICATE PINTLE HOOK (REFER TO LO 5-
3810-306-12.)
END OF TASK
14-2
