TM 5-3810-306-20INSTALLATION:1.INSTALL SWING MOTOR (1).a.Apply silicone sealant on swing motor flange (4)mating surface. Do not allow to dry.CAUTIONDo not force swing motor drive gearin swing brake.b.Install swing motor (1) and new preformedpacking (7) on swing brake (6).c.Apply Loctite 242 to threads and install twosocket head capscrews (2) and lockwashers (3).Torque to 45 ft-lbs.d.Remove tags, plugs and connect hydraulic linesto swing motor (1).2.CONNECT GROUND CABLE AT SHUNT. (REFERTO PAGE 8-109.)3.START ENGINE AND CHECK SWING FUNCTION.CHECK FOR HYDRAULIC LEAKS. (REFER TOTM 5-3810-306-10.)END OF TASK17-18
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
