Quick Setting of the Reeving

TM 5-3810-307-10

4.2 Quick Setting of the Reeving

If, during the crane operation, the reeving is modified, the LMI system has to be adjusted to

this modification. The input of the reeving can be carried out directly without having to go

through the whole LMI programming procedure again:

Call LMI Programming Procedure.

Directly call function "Quick Setting of the

Reevings".

NOTE

The direct call is impossible, if the

system has been turned off for more

than two hours.

input of reeving:

increase reeving

decrease reeving

confirm reeving

Confirm modification.

(select again the function upon faulty input)

NOTE

If a configuration is selected which is not available on the present crane, the

system will not accept the selection and the display will indicate the error

code E04.

G-18 Change 1