TM 5-3810-307-24-1-1
SHIFT CONTROL ASSEMBLY (SUPERSTRUCTURE CAB)
Removal
a.
Ensure battery disconnect is in OFF position.
b.
Remove knob (1, Figure 2-1-19) from lever of shift control switch (3).
c.
Remove screws (2) and remove shift control switch (3) from rear of housing (4).
d.
Tag and disconnect electrical leads for shift control switch (3).
NOTE
It may be necessary to remove mounting hardware for swing lock control
bracket and move bracket aside to remove hardware for shift control housing.
e.
If necessary, remove nuts (4), lockwashers (5), screws (6), and shift control housing (7) from dash panel.
Installation
a.
If removed, install shift control housing (7, Figure 2-1-19) on dash panel with screws (6), lockwashers (5),
and nuts (4).
b.
Connect electrical leads for shift control switch (3) and remove tags.
c.
Insert shift control switch (3) into housing (7) from rear of dash panel, and secure to housing with screws
(2).
NOTE
If swing lock control bracket was moved, secure in dash panel with mounting
hardware.
d.
Install knob (1) on lever of shift control switch (3).
2-1-87
