TM 5-3810-307-24-1-1
DASH PANEL (CARRIER CAB)
Removal
a.
Ensure battery disconnect switch is in OFF position.
b.
Remove top dash panel (3, Figure 2-1-20) as follows:
(1)
Remove heater control from dash panel only, refer to Heater Control (Carrier Cab) Removal
procedures, steps a. thru c.
(2)
Remove defroster control from dash panel only, refer to Defroster Control (Carrier Cab) Removal
procedures, steps a. thru d.
(3)
Tag and disconnect air lines from trailer air supply/parking brake control assembly, refer to Control
Assembly, Trailer Air Supply and Parking Brake (Carrier Cab) Removal procedures.
(4)
Remove screws (1, Figure 2-1-20) and collars (2) securing dash panel (3) to front console.
(5)
Tilt dash panel (3) to lay against steering column, tag and disconnect all electrical leads from
gauges, switches, and indicator lights, and remove dash panel from cab.
c.
Remove left or right dash panel (6 or 7, Figure 2-1-20) as follows:
(1)
Remove screws (4) and collars (5) securing dash panel (6 or 7) to front console.
(2)
Tilt dash panel (6 or 7) back, tag and disconnect all electrical leads from switches, and remove dash
panel from cab.
Installation
a.
Install top dash panel (3, Figure 2-1-20) as follows:
(1)
Position dash panel (3) on steering column, connect all electrical leads to gauges, switches, and
indicator lights, and remove tags.
(2)
Position dash panel (3) on front console and secure with collars (2) and screws (3).
(3)
Mount heater control in dash panel, refer to Heater Control (Carrier Cab) Installation procedures.
(4)
Mount defroster control in dash panel, refer to Defroster Control (Carrier Cab) Installation
procedures.
(5)
Connect air lines to trailer air supply/parking brake control assembly, refer to Control Assembly,
Trailer Air Supply and Parking Brake (Carrier Cab) Installation procedures.
b.
Install left or right dash panel (6 or 7, Figure 2-1-20) as follows:
(1)
Position dash panel (6 or 7) near front console, connect all electrical leads to switches, and remove
tags.
(2)
Position dash panel (6 or 7) on front console and secure with collars (5) and screws (4).
2-1-89
