TM 5-3810-307-24-1-1
b.
Install center cowl as follows:
(1)
Position center cowl (13) over studs on crane and secure with nylon washers (14), washers (12) and
locknuts (11).
(2)
Install coolant recovery tank on center cowl (10), refer to Radiator and Air Cooler Installation
procedures.
(3)
Install exhaust tube and adapter between turbocharger and flexible exhaust tube, refer to Exhaust
System Installation procedures.
(4)
Install engine top panel and door assembly (17), refer to step c.
c.
Install engine top panel and door assembly as follows:
(1)
If removed, install support rods, handles, and latch brackets on doors, and doors on top panel.
(2)
Install engine top panel and door assembly (17) on crane with pins (16) and clips (15).
d.
Install rear cowl as follows:
(1)
If removed, install grill on rear cowl (20) with washers and capscrews.
(2)
Position rear cowl (20) over studs on crane and secure with nylon washers (21), washers (19) and
locknuts (18).
(3)
Install engine top panel and door assembly (17), refer to step c.
2-2-13
