SM08-015-1
Page 8
ened surfaces. Keep these gears together because they
are a matched set. Examine and replace if necessary.
Refer to WEAR LIMITS. Remove the thrust plate from
the bearing carrier. Examine and replace if necessary.
Refer to WEAR LIMITS.
6. Lift the gear housing from the bearing carrier. If
4. Remove the thrust plate. Examine and replace if
prying is necessary, take care not to damage the ma-
necessary. Refer to WEAR LIMITS.
chined surfaces. Examine and replaceif necessary. Re-
fer to WEAR LIMITS.
NOTE
Steps 5,6, and 7 are only necessary for
multiple section pumps.
7.
Carefully lift off the bearing carrier to prevent dam-
age to contact face and edges. Dowel pins will remain
either the bearing carrier or the gear housing. Do not re-
move the dowel pins
5. Carefully remove the drive and driven gears. Avoid
tapping the gear teeth together or against other hard-
.