SM08-015-1
Page 10
double lip seal and the shaft end cover. Tap the seal out
and discard. Remove and discard all rubber and poly-
mer seals.
ASSEMBLY.
12. Use a bearing puller to remove the outboard bear-
ing.
1. Stone all machined surfaces with a medium grit
carborundum stone.
2. If the bushings have been removed, deburr the
bushing bores with emery cloth. Rinse the parts in sol-
vent. Air blast all parts and wipe clean with a clean lint-
13. Grip the shaft end cover in a vise with the mounting
less cloth before starting assembly.
face down. Remove the double lip seal by inserting the
special seal removal tool into the notch between the