SM08-015-1
Page 9
10. Inspect all bushings for scoring or discoloration
8. Remove the connecting shaft. Remove the thrust
and replace if necessary. Refer to WEAR LIMITS. Use a
plate. Examine and replace if necessary. Refer to
bushing puller as outlined under REQUIRED TOOLS.
WEAR LIMITS. Remove the driven gear and the integral
gear and the drive shaft. Keep these together as they
are a matched set. Examine and replace if necessary.
Refer to WEAR LIMITS. Be careful not to damage the
machined surfaces of the gears.
CAUTION
Be careful not to damage the machined
surfaces.
11. If the pump is equipped with an outboard bearing,
place the shaft end cover in the vise with the mounting
face up. Remove the snap ring with snap ring pliers. If
9. Lift or pry off the first section gear housing. Exam-
the unit is equipped with a spiral lock retaining ring, re-
ine and replace if necessary. Refer to WEAR LIMITS.
move with a small screwdriver or awl.