TM 5-3810-307-24-2-2
Install the main caps in their corresponding positions.
When correctly installed, the tangs (slots) should
both be on the same side.
NOTE
#1 is to the front of the block.
Turbocharger
Drain
Tube
Removal (0-66)
3/4 Inch Drift & Hammer
Drive the drain tube out from the inside of the
cylinder block.
Cylinder Block - Removing From
the Rollover Stand (0-67)
18 mm
Remove the cylinder block from the rollover stand.
NOTE
Refer to Component Section 1 for cleaning
and inspection of the cylinder block.
6B Cylinder Block Weight:
124 Kg [275 Ib]
Engine Assembly (0-68)
Cylinder Block
-
Prepare
for
Assembly (0-69)
Install the cylinder block to the rollover stand.
NOTE
Make sure the cylinder block has been
cleaned and inspected as described in
Component Section 1.