TM 5-3810-307-24-2-2
12 mm
Remove the capscrews, rod cap and rod bearings.
Mark the cylinder number on the back side of the
rod bearings.
Catch the piston with one hand while pushing the
rod and piston assembly out of cylinder bore. Care
must be taken not to mutilate the connecting rod or
bearing.
NOTE
Disassembly of the piston/rod assembly is
described in Component Section 1.
Crankshaft - Removal (0-65)
23 mm
Rotate the engine to a horizontal position so the
main bearing caps are accessible. Remove the
capscrews from the main bearing caps.
The main caps should be numbered. If they are
not, mark them with the correct number.