TM 10-3950-672-24-2
Completely loosen the exhaust valve adjusting screw.
Rotate the crankshaft in the direction of engine rotation
until the pointer is aligned with the TDC mark. Look
through the back side of the gear housing for the timing
pin hole in the camshaft gear. If the hole is not visible,
the crankshaft must be rotated one revolution.
T-25 Torkscrew
Apply a coat of Lactate 59241 to the threads of the
torkscrews. Hold the timing pin in the hole to align the
housing.
m
Complete the procedure for camshaft installation
5-214