Figure 3-96. Transfer chain case cover, removal and installation.
(2) Remove gasket from cover, or case.
(1) Remove transfer chain case cover (para
(3) Install in reverse order.
b. Cleaning, Inspection, and Repair.
(2) Remove two cotterpins (fig. 3-97) and
master link from chain, then remove transfer chain from
(1) Clean all parts in an approved cleaning
input and main shaft sprockets.
solvent and dry thoroughly.
(3) Install in reverse order.
(2) Visually inspect case for dents or cracks.
b. Cleaning, Inspection, and Repair.
Inspect mounting hardware for burs or stripped threads.
Inspect gasket for deterioration.
(1) Clean chain in an approved cleaning
(3) Repair by straightening dents or welding
solvent and dry thoroughly.
cracks. Replace a defective cover, damaged gasket, or
(2) Visually inspect chain for damaged links,
mounting hardware.
pins, or cotterpins.
(3) Repair by replacing damaged links, pins,
3-113. Transfer Chain
or removed cotterpins.
a. Removal and Installation.
3-107
