Figure 3-97. Transfer chain, removal and installation.
(3) Repair by replacing a damaged sprocket,
3-114. Input Shaft Chain Sprocket
or defective hardware
a. Removal and Installation.
(1) Remove transfer chain case cover (para
3-115.Main Shaft Sprocket
a. Removal and Installation.
(2) Remove transfer chain (para 3-113).
(3) Remove lockwire from two screws in input
(1) Remove transfer chain case cover (para
shaft (fig. 3-97).
(4) Remove two screws and plate, then
(2) Remove transfer chain (para 3-113).
remove input shaft sprocket from input shaft.
(3) Remove cotterpin, nut. and flatwasher
(5) Install in reverse order.
from mainshaft, then remove mainshaft sprocket.
b. Cleaning, Inspection, and Repair.
(4) Install in reverse order.
(1) Clean all parts in an approved cleaning
solvent and dry thoroughly.
b. Cleaning, Inspection, and Repair. Clean,
(2) Visually inspect mounting hardware for
inspect, and repair in manner similar to that described in
burs or stripped threads. Inspect sprocket for cracked or
paragraph 3-114b, above.
broken teeth.
3-108
