TM 5-3810-207-20/TO 36C23-3-37-12
Figure 67. Boom hoist brakeband, removal end installation.
c. Installation.
(1)
Install the boom hoist brakeband as illustrated
on figure 67.
(2)
Adjust the boom hoist brakeband (TM 5-3810-
207-10).
140. Secondary, Primary, and Load Lowering
Brakebands
a. Removal.
(1)
Remove the secondary brakeband as instructed
on figure 68.
(2)
Remove
the
primary
and
load
lowering
brakebands in a similar manner.
b. Cleaning and Inspection.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect the brake lining for excessive wear,
glazing, and other damage. Replace all
brakebands
having
defective
lining.
(3)
Inspect all other parts for breaks, excessive
wear, and other damage. Replace all defective
brakebands and parts.
c. Installation.
(1)
Install the secondary brakeband as illustrated on
figure 68.
(2)
Install the primary and load lowering brakebands
in a similar manner.
(3)
Adjust secondary, primary, and load lowering
brakebands (TM 5-3810-207-10).
141. Swing Brake and Linkage
a. Removal.
(1)
Remove
the
swing
brakeband
yoke
as
instructed on figure 69.
100
