TM 5-3810-207-20/TO 36C23-3-37-12
Figure 66. Boom hoist clutch band, removal and installation.
b. Cleaning and Inspection.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect clutch band lining for excessive wear
and glazing. Remove glazing with a wire brush.
Replace a clutch band having worn or defective
lining.
(3)
Inspect all other parts for breaks, cracks, and
other damage. Replace all defective parts.
c. Installation.
(1)
Install the boom hoist clutch band as illustrated
on figure 66.
(2)
Install the boom hoist hydraulic cylinder (par.
131).
(3)
Adjust the boom clutch band (TM 5-3810-207-
10).
139. Boom Hoist Brakeband
a. Removal.
(1)
Remove
the
boom
hoist
brakeband
as
instructed on figure 67.
b. Cleaning and Inspection.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect the lining for excessive wear, glazing,
and other damage. Replace a brakeband
having a defective lining.
(3)
Inspect all other parts for excessive wear,
breaks, and other damage. Replace parts and
brakeband as necessary.
99
