TM 5-3810-207-20/TO 36C23-3-37-12
Figure 68. Secondary, primary, and load lowering brakebands, removal and installation.
(2)
Remove the swing brake and linkage as
instructed on figure 69.
b. Cleaning and Inspection.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect the brake lining for excessive wear,
glazing, and other damage. Replace a
brakeband having defective lining.
(2)
Inspect all parts for breaks, excessive wear, and
other damage. Replace all defective parts.
c. Installation.
(1)
Install the swing brake and linkage as illustrated
on figure 69.
(2)
Adjust the brakeband (TM 5-3810-207-10).
(3)
Install the swing brakeband yoke as illustrated
on figure 69.
142. Swing Lock Assembly
a.
Removal. Remove the swing lock assembly as
instructed on figure 70.
b.
Disassembly. Disassemble the swing lock lever
as illustrated on figure 71.
c.
Cleaning, Inspection, and Repair.
(1)
Clean all parts with an approved cleaning
solvent.
101
