TM 5-3810-207-20/TO 36C23-3-37-12
from falling out and the tube from being
pinched.
(3) Install the tire on the rim and secure
with the retaining ring.
(4) Inflate the tire to 80 psi.
Caution:
Lay tire with the retaining ring down
and secure the wheel with a chain to
a beam or other solid object while
inflating tire to avoid injury.
(5) Install the wheel on the carrier (par. 283
and/or 285).
288. Right-Front Shock Absorber
a.
Removal.
(1) Remove
the
shock
absorber
as
instructed on figure 178.
(2) Remove the left-front shock absorber in
a similar manner.
b.
Cleaning and Inspection.
(1) Clean all parts with an approved
cleaning solvent.
(2) Inspect the shock absorber for proper
operation and other damage. Replace
defective shock absorber.
(3) Inspect the mounting hardware for
breaks, excessive wear, and other
damage. Replace defective hardware.
c. Illustration.
(1) Install the right-front shock absorber as
illustrated on figure 178.
(2) Install the left-front shock absorber in a
similar manner.
289. Ventilation Breathers
a.
Removal.
(1) Remove the front differential breather
as instructed on figure 178.
(2) Remove rear differential breathers in a
similar manner.
(3) Remove the transfer case breather in a
similar manner.
b.
Cleaning and Inspection.
(1) Clean the breathers with an approved
cleaning solvent.
(2) Inspect the breathers for bends, breaks,
and other damage Replace defective
breathers as necessary.
c.
Installation.
(1) Install the front differential breather as
illustrated on figure 178.
(2) Install the remaining breathers in a
similar manner.
230
