TM 5-3810-207-20/TO 36C23-3-37-12
Figure 11. Distributor, coil, points, condenser, and resistor, removal, adjustment, and installation.
c.
Adjustment. Place a feeler gage between
the center electrode and the ground electrode of the
spark plug. Set the clearance at 0.035 inch. Adjust the
clearance by bending the ground electrode.
Note.
Spark plug clearance for carrier
engine is 0.025 inch.
Note.
Do
not
damage
the
insulation
surrounding the center electrode.
d.
Test. Test the spark plugs with an approved
testing machine. Replace all defective plugs.
e.
Installation. Install the spark plugs and
cables as illustrated on figure 13.
77. Starter Solenoid
a.
Test. Test the solenoid and starter
assembly as instructed on figure 14.
39
