TM 5-3810-207-20/TO 36C23-3-37-12
Figure 13. Spark plugs and cables, removal and installation.
c.
Installation. Install the oil pressure sending
unit, safety switch, and oil pressure switch as illustrated
on figures 17 and 18.
81. Water Temperature Sending Units
a.
Removal. Remove the water temperature
sending units as instructed on figures 17 and 19.
b.
Cleaning and Inspection.
Clean and
inspect. Replace defective sending units.
c.
Installation. Install the water temperature
sending units as illustrated on figures 17 and 19.
82. Fuel Tank Sending Unit
a.
Removal. Remove the fuel tank sending
unit as instructed on figures 17 and 20.
b.
Cleaning and Inspection.
Clean and
inspect. Replace defective fuel tank sending unit.
c.
Installation. Install the fuel tank sending unit
as illustrated on figures 17 and 20.
83. Slave Receptacle
a.
Removal. Remove the slave receptacle as
instructed on figure 21.
b.
Cleaning and Inspection.
(1) Clean the slave receptacle with a cloth
dampened with an approved cleaning
solvent.
(2) Inspect the slave receptacle for breaks,
frayed or broken leads, and other
damage. Replace defective slave
receptacle.
c.
Installation. Install the slave receptacle as
illustrated on figure 21.
41
