B-Flywheel housing removal
Figure 3-29. (2) -Continued,
3-54. Installation
a. Install flywheel housing and flywheel as
illustrated on figure 3-29. (Refer to torque data, para 1-
NOTE
When tightening flywheel capscrews,
tighten in sequence shown on figure
lbs. Refer to figure 3-31 for torquing
sequence of flywheel housing.
B-Flywheel bores and clutch face check points
Figure 3-30. (2) --Continued
b. Use indicator and check flywheel bores and
clutch face. Refer to figure 3-30B. for check points and
limits.
NOTE
Crankshaft must be kept to either
front or rear limit of thrust clearance
while checking face
l
Figure 3-30. (1) Flywheel torquing and checks data.
3-50
