(1) If run-out exceeds limits, remove flywheel.
Clean flywheel and crankshaft adapter mating surfaces.
(2) Reinstall flywheel and torque flywheels
capscrews, retorquing in proper sequence.
(3) Recheck flywheel bores and clutch face.
Figure 3-31. Flywheel housing torquing sequence.
c. Install starter (TM 5-3810-232-12).
d. Install engine assembly (para 2-10).
Section XVIII. CARRIER ENGINE GEAR HOUSING AND CAMSHAFT
3-55. Removal
a. Remove gear cover as illustrated on figure 3-32.
A--Gear cover, removal
Figure 3-32. (1) Gear cover and camshaft, removal and
installation.
3-51
